Cessna 172 Introduction and Landing Practice

     To start off, I'd like to apologize for my lack of activity on here. I've still been flying and posting videos, but it seems as though I have neglected this blog. Anyways, I'm back! Since I have written last, I have soloed the C150 a couple of times as well as completed one Cross Country flight to Circleville.

     On 5/27/13, I went to the airport planning on flying the C150, N3718J. But, that did not turn out to be the case because of a broken alternator keeping the battery from recharging and the plane from starting. So, I went ahead and upgraded to N2814L, Waynesville's C172, for the first time. Because I had never flown this aircraft before, Joe gave me a quick introduction to the aircraft on the ground during the pre-flight.

     Once we were airborne, I headed due North away from the airport a few miles to do some stalls. Joe demonstrated the first one so that I could see how the airplane handled differently than the C150. Surprisingly, the panel and rest of the airplane was almost identical to the C150 despite a few tweaks, which made the transition very easy. After Joe demonstrated one stall, we turned back due South and I did four to get used to the aircraft before trying to land. After doing some air work, I entered the pattern for runway 8. My first two landings were long but soft considering about a 10kt crosswind from the south. The last few were soft as well, but I was also working on landing as short as possible. 

Video from today's flight with a GoPro HD Hero 2

      Overall, this was a very nice flight and I was really excited to get to fly a new airplane. But, I am still planning on sticking with N3718J, the C150, for the rest of my training. The next step for me is to solo at a towered field as well as complete all of my Cross Country flights. With my 17th birthday being in September, I am very close to my PPL, but just need to fly more often!

Cessna 150 Winter Flying in the Snow

     On 2/5/13, I had the chance to fly in the snow for the first time. It was a chilly day at just 19 degrees and a couple of inches of snow were on the ground covering the grass runway. I got to the airport and went inside to get the keys and book, then promptly went outside to the plane. Quickly but thoroughly, I preflighted N3718J, a Cessna 150, then went back inside to warm and meet my instructor that afternoon.

     As quickly as possible, my instructor and I went out to the plane and hopped inside. Once inside, I got the chance to plug in my never yet used David Clark H10-13.4 headset. After another quick refresher since I hadn't flown a Cessna 150 since the Summer, I got the engine started. When I tried to start taxiing, I could barely move out of the snow without using a ton of throttle. This was definitely a new feeling. Next, I completed the short CIGAR checklist and found everything to be working properly before taking off.

     Finally, it was time to take flight in the light snow flurries that were falling. With the cold air, the engine roared and provided plenty of power for us to climb quite rapidly into the strong headwind. Because many airports nearby did not have their runways plowed, we decided to just stick in the pattern at Stewart. I performed many normal landings that I must say, were quite good. Then, my instructor Joe switched it up a bit. On downwind one pattern, he suddenly pulled out the throttle and I had to do a simulated engine out procedure. After a safe landing, Joe told me to take back off and do one more before we finished for the day. The next engine out simulation was again uneventful and I made a nice landing. I taxied back to our spot and quickly tied up the aircraft and ran inside through the cold.

     Today was really a great flight. I couldn't figure out if it was the strong headwind or the snow on the ground, but every landing seemed very soft. Nonetheless, it felt good to make some good landings after not flying the plane in such a long time. Joe gave me the pre-solo exam for the Cessna 150, so I might be soloing in that plane next lesson or the one after that. Look forward to it and see my video below of this flight filmed with a GoPro HD Hero 2.

Video from today's flight

This Flight: .9 Dual, .9 Total, N3718J, 40I-40I
Total hours to date: 21.1

After a break, I'm back in the Cub!

     After a break of almost 4 months, I was itching to again find myself in the sky. Whether it be weather or my busy schedule, there always arose a reason for me to not be able to fly. Finally, I took to the skies again on 1/20/2013 which was the first flight of the year. Only the Cub was open this weekend with Joe, so I booked it. Besides, I hadn't flown in a while. I might as well return to the basics.

     This Sunday, it was a chilly 28F so Joe and I were both bundled up to go flying. Once we got out to the airplane, we found that N98286, the "big" Cub, was low on gas. So after several attempts, we got the engine running and taxied to get some fuel. After nearly freezing, we got the airplane fueled up and were ready to fly. The winds were steady at about 10kts, sometimes gusting to 15kts before we took off. This gave us a nice wind straight down the runway and also a little crosswind practice (nothing I couldn't handle even after taking a 4 month break). After completing the simple CIGAR checklist, I taxied to runway 26 and prepared to take off.

     The power that airplanes have in cold, dry air is amazing. As soon as I increased the throttle, we were practically in the air already. After reaching 1500ft much sooner than usual, I headed towards Caesar's Creek Gliderport where I practiced a few landings. The first one took me by surprise with a little bump, but after that I regained my "feel" of landing the Cub. After getting my landings down again, we headed back to Stewart to do a few more.

     Once again, the first one was a little bouncy because of the wind. But after that, I managed to squeeze out smooth landings one after another. After an hour, it was time to head in to the hangar. Overall, it was a great flight after having to take such a long break. Thankfully, I was not as rusty as I had imagined I would be.

     Sorry guys, no video this week. After about 20 minutes, my GoPro suction cup mount suddenly failed because of the cold(I think). But, here is a quick picture taken after the flight.

This Flight: 1.0 Dual, 1.0 Total, N98286, 40I-2OH9-40I
Total hours to date: 20.2